Select Tool category:


Lisle logo  
Lisle Automotive Speciality Tools
 
Lisle
Model # 17850
Lisle
Model # 21520
Lisle
Model # 39850
Lisle
Model # 39900
Lisle
Model # 41500

Lisle 21520 Truck throttle depressor
Lisle 39850 Master PLUS disconnect kit
Lisle 39900 Master disconnect set
Lisle 41500 Pickle fork set
Lisle
Axle seal driver for Ford
  • Installs front seals and rear axle seals on Ford vehicles
  • Double-ended adapter for both front and rear seals
  • The adapter is bored to fit over the axle stub
  • Long 27-3/4" handle reaches beyond suspension components that are in the way

Lisle
Truck pedal depressor
  • Depresses & holds clutch pedals
  • The 2-piece telescoping tool extends to the pedal & locks in position.
  • Brace the formed plate against the front seat or steering wheel for support
  • Tool extends from 18-1/2" to 34-1/2"
Lisle
Master+ disconnect set

  • Contains the most popular disconnect tools
  • For air conditioning & fuel lines
  • For transmission lines
  • For oil cooler lines & air lines
  • Low-profile Jiffy-tite connectors
  • Low-profile fuel line disconnects
  • Hydraulic clutch line disconnect for GM
  • Carrying case included.
Lisle
Master disconnect set
  • 8 popular disconnects for all A/C & fuel lines
  • 37000 AC/Fuel line disconnect set,
  • 39400 Angled AC/Fuel line
  • 35000 GM Flex fuel line
  • 37500 GM fuel line disconnect
  • 39930 5/16" & 3/8" scissors
  • 39940 Coupler disconnect
  • 39960 Ford transmission line disconnect.
Lisle
Pickle fork kit

  • Kit consists of:
    3 forks (11/16", 15/16", 1-1/8")
  • 2 handles; 1 for hammering, 1 for use w/ an air hammer (.401" shank).
  • All forks are threaded to interchange with either handle. Forks are heavy-duty forgings, handles are heat-treated alloy steel.
~DISCONTINUED
Price: $25.25
IN STOCK
Price: $103.50
IN STOCK
Price: $37.50
IN STOCK
Price: $31.50
IN STOCK
Lisle
Model # 43300
Lisle
Model # 44180
Lisle
Model # 45750
Lisle
Model # 45900
Lisle
Model # 48700
Lisle 43300 Pneumatic fan clutch wrench set
Lisle 44180 Fan clutch spanner wrench
Lisle 45750 Inner tie rod tool
Lisle 45900 Hood prop tool
Lisle 48700 throttle pedal depressor
Lisle
Pneumatic fan clutch wrench set

  • Use with an air hammer (.401 shank)
  • Set includes:7/8", 32mm, 36mm, 40mm thin & new 47mm size to fit Ford 6.0L & 6.4L Powerstroke diesel pickup. 1-7/8"& 2" are still included in the set.
Lisle
Fan clutch spanner wrench

  • For GM, Jeep and Dodge trucks, vans & SUV’s with pressed on water pump pulleys
  • Doubled ended - hold the pulley firm with the spanner wrench

Lisle
Inner tie rod tool


  • Utilizes six crow's feet, sizes  1-1/2", 1-3/16", 1-1/4", 1-5/16", 1 7/16" & 33.6mm, to engage the wrench flats.
  • Works on the inner tie rods with inaccessible wrench flats
  • Includes 1-1/2" crow's foot for Chevrolet Colorado & GMC Canyon
Lisle
Hood prop tool


  • Telescopes from 18-1/2" to 46-3/4"
  • Works on all makes of cars and trucks
  • Can be used from the side of car for better access to the engine compartment
Lisle
Throttle pedal depressor

  • Holds throttle at constant RPM.
  • Engage the nylon hook under the steering wheel. Then extend the depressor rod to the accelerator pedal. Use the adjusment screw to fine-tune the RPM level.
  • 40" in overall length
Price: $109.50
IN STOCK
Price: $26.50
IN STOCK
Price: $53.50
IN STOCK
Price: 21.50
IN STOCK
Price: $18.50
IN STOCK
 

 

 

Lisle logo  
Lisle Automotive Speciality Tools
Lisle
Model # 50600
Lisle
Model # 51450
Lisle
Model # 61450
Lisle
Model # 60610
Lisle
Model # 59400
Lisle 50600 single spring brake tool
Lisle 51450 harmonic damper puller set
Lisle 61450 10pc cap-style oil filter wrench set
Lisle 60610 Replay test jumper kit II
Lisle 59400 pinion bearing driver set
Lisle
Single spring brake tool


  • Many GM brakes
    use a heavy single spring, the 50600 engages the spring and quickly releases the spring tension
  • 2-piece construction - releases tension on both large & small GM single spring brakes during servicing

Lisle
Harmonic damper puller set

  • Low profile design works in confined spaces eliminating the need to remove the radiator
  • Jaws are now held in place with a clevis pin & can be easily removed & replaced
  • A fourth rod & the jaws have been beefed up to fit Trailblazer, Envoy, Bravada / Colorado, Canyon & other 4.2L applications
  • Most complete tool on the market
Lisle
10pc cap-style oil filter wrench set

  • Ten 3/8" Drive cap
    oil filter wrenches.
  • Includes Sizes:
    64mm - Toyota
    66mm - 14 Flutes
    65/67m -14 Flutes
    80mm -15 Flutes
    68mm -14 Flutes
    86mm -16 Flutes
    74/76mm -15 Flutes
    93mm -15 Flutes
    76mm -30 Flutes
    93mm -36 Flutes
    76mm -30 Flutes
Lisle
Relay test jumper kit II


  • Set of 4 relay test adapters make testing relays or live circuits quick & easy
  • Adapters have tabs for clamping & flat pads to place test leads on
  • Simply remove relay to be tested, insert correct adapter & insert relay into adapter
  • Fit the most popular size relays on domestic & import vehicles
Lisle
Pinion bearing driver set


  • 8 drivers for inner & outer pinion bearing races on 1/2 & 3/4 Ton Ford, Dodge & GM pickups.
  • Extended, two-piece handle for driving rear pinion bearing races
  • Pneumatic handle is also included for use with an air hammer.
Price: $22.50
IN STOCK
Price: $59.50
IN STOCK
Price: $48.50
IN STOCK
Price: 46.00
IN STOCK
Price: $87.50
IN STOCK
Lisle
Model # 59800
Lisle
Model # 65450
Lisle
Model # 65900
Lisle
Model # 92102
Lisle
Model # 94102
Lisle 59800 Serpentine belt tool
Lisle 65450 Pneumatic rear brake tool kit
Lisle 65900 Ford spark plus re-threading kit
Lisle 92102 Creeper - RED
Lisle 94102 Creeper - BLUE
Lisle
Serpentine belt tool

  • Releases tension on serpentine belts w/ a spring-loaded Idler pulley.
  • Fits idler pulleys 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex & both 3/8" & 1/2" square drive sizes
  • For applications with limited access, 13mm & 16mm sockets are built into the handle
  • 8 low-profile sockets & extension help to fit into tight spots. Includes: 19mm socket for Honda & Toyota applications.

Lisle
Pneumatic rear brake tool kit

  • For rotating pistons back into the caliper to provide clearance for new pads
  • Includes 5 adapters for use in both 2- & 4-wheel disc brake assemblies of most domestic & import cars
  • Pivoting handle provides leverage to rotate stubborn pistons back into the caliper
  • Tool may be used “on” or “off” the car & works on right or left hand threads
Lisle
Ford spark plug rethreading kit

  • Replaces stripped spark plug threads on Ford V10, 4.6 & 5.4 liter engines
  • This set includes a drill, tap, wedge tool, insert tool, 10 steel inserts, plus a vacuum adapter to remove shavings from the chamber
  • An inspection scope must be used to insure all shavings are removed from the combustion chamber. An inspection scope is not included.
Lisle
Creeper - Red


  • RED CREEPER
  • Low profile, 7/8" floor clearance
  • Dimensions: Length 38", Width 17 1/2", Height 4"
  • Surface is resistant to solvents, greases & fuels
  • Urethane rollers
  • Unique design that is body fitting. developed through testing on many body types.
  • The rollers are inserted into the creeper body.  This provides added strength & easy roller replacement.
Lisle
Creeper - Blue


  • BLUE CREEPER
  • Low profile, 7/8" floor clearance
  • Dimensions: Length 38", Width 17 1/2", Height 4"
  • Surface is resistant to solvents, greases & fuels
  • Urethane rollers
  • Unique design that is body fitting. developed through testing on many body types.
  • The rollers are inserted into the creeper body.  This provides added strength & easy roller replacement.
Price: $36.50
IN STOCK
Price: $126.75
IN STOCK
~Discontinued
Price: 59.50
IN STOCK
Price: $59.50
IN STOCK
 

 

Astro Pneumatic logo  
Astro Pneumatic Tools
 
Astro
Model # 600ST8
Astro
Model # WINDK
Astro
Model # 405
Astro
Model # 8710
Astro
Model # 5507
Astro 600ST8 8 gauge straight punch
Astro WINDK Windshield removal tool kit
Astro 405 Air caulk gun
Astro 8710 3-speed electric fan
Astro 5507 7pc. body/ fender kit
Astro
Straight punch - 8mm

  • Performs hole punching & panel crimping
  • Every lever pull delivers a single punch/ single flange crimp with precision control
    -Forms an offset crimped edge on sheet metals for no-bump lap welds
  • Rotating head
  • Punch diameter: 8mm (5/16")
  • Punch capacity: 1.6mm (1/16")
  • Crimping capacity: 1.6mm (1/16")
  • Length:10" (254mm)
  • Tool weight: 3.00lbs.
  • NOT FOR USE w/ the newer hardened sheet metals called: “BORON STEEL”

Astro
Windshield removal tool

  • Sealant cutter that cuts around bonded & encapsulated glass
  • Efficiently cleans & smoothes moldings after glass removal
  • Easing throttle & regulator provide easy speed control
  • Flexible blade mount can be positioned in 12 different ways (at 30° increments)
  • Rear exhaust
  • Blades Included
    -2pc. 57mm Bent blade
    -1pc. 90mm Round nose straight blade -1pc. 52mm Bent curved blade
    1pc. 35mm Flat-nose straight blade
  • Length: 8.00"
  • Weight: 3.00 lbs.
Astro
Air-powered caulk gun

  • Permits smooth flow caulking
  • Dispenses caulking, adhesives & sealants from standard cartridge
  • Specifications:
    I.D. size (tube): 2" Tube length: 8-1/4"
  • Weight: 2.80 lbs
Astro
3-Speed electric fan

  • 3-Speed fan switch
  • Moves air up to 300 CFM
  • 1/4 Horse power
  • Plastic pads prevent scratching or damage to work surface
  • (2) 110V AC outlets
  • 8.5ft. cord CSA approved
  • Heavy duty 3-prong plug w/ 14AWG x 3C gauge wire
  • Motor CSA approved
  • Built-in overload protection
  • For indoor or outdoor use
Astro
7pc. Body/ fender kit

  • Polished, drop-forged steel dollie
  • Hammers hickory handle
  • FSC (Forest Stewardship Council) certified
    Set Includes:

    -Shrinking peen hammer
    -Pick peen hammer
    -Straight peen hammer
    -Universal dolly
    -Heel dolly
    -Curved dolly
    -Mushroom dolly
    -Blow molded storage case
Price: $64.50
IN STOCK
Price: $71.50
IN STOCK
Price: $21.50
IN STOCK
Price: 47.50
IN STOCK
Price: $44.50
IN STOCK
Astro
Model # 78618
Astro
Model # 7848
Astro
Model # 7858DX
Astro
Model # 78585
Astro
Model # 9477
Asro 78618 18pc. brake caliper windback set
Astro 7848 brake tool kit
Astro 7858DX Radiator pressure test kit
Astro 78585 Radiator & Vac pressure tester kit
Astro 9477 7pc. Crimping tool kit
Astro
18pc. Brake caliper service tool set

  • Designed for push back & wind back brake pistons
  • Provides both left-handed & right-handed thrust bolt assemblies
  • Adaptor plates with thrust bolt assembly & reaction plate are precisely made
  • Prevents damaging pistons & seals
  • Updated adaptor set applicable for wide variety of vehicles
  • Plastic storage case included
Astro
8pc. Brake service
tool set

  • Set includes:
    1pc. Spring compressor
    1pc. Brake spring installer
    1pc. Spring removal tool
    1pc. Brake retaining spring tool
    1pc. Brake spring pliers
    2pcs. Brake adjustment spoons
    1pc. Mini adjustment spoon
  • Plastic storage case include
Astro
Radiator pressure tester kit

  • Easy testing of high pressure cooling systems, including radiator caps
  • Gauge tests pressure range:
    0-35psi (2.5 bar)
  • Color coded dial gauge allows safe, easy, & accurate testing of higher pressure cooling systems
  • Color coded radiator test caps make it easy to choose the suitable test cap
  • Suitable for domestic & import vehicles
  • Blow molded case for easy storage & transport
Astro
Radiator vacuum/ pressure tester kit

  • Allows easy testing for leakage in radiator system & quick change of coolant
  • Unit is suitable for domestic & import vehicles
  • Special design of vacuum purge & refill tool connection fits nearly all type of radiator openings
  • Color coded radiator test caps make it easy to choose the suitable test cap
  • Includes: pressure testing pump w/ hose, quick coupler w/ pressure release, & gauge
  • Test range 0-35psi (2.5 bar)
  • Plastic storage case included
Astro
7pc. Ratcheting crimping tool set

  • Kit includes 6 dies:
    -A Jaw: Insulated terminals: for AWG 22-18/16-14/12-10
    -B Jaw: Non-Insulated terminals: for AWG 20-18/16-14/12-10/8
    -C Jaw: Open barrel terminals: for AWG 20-18/16-14/12-10
    -D Jaw: Insulated Cord-End Terminals (small AWG.): for AWG 22/20/18/16/14/12
    -F Jaw: Insulated cord-end terminals (Huge AWG) for AWG 10/8/6
    -H Jaw: Open barrel terminals & D-SUB, V3.5: for AWG 14/22/8
  • Plastic storage case included
Price: $34.75
IN STOCK
Price: $24.00
IN STOCK
Price: $179.50
IN STOCK
Price: 219.50
IN STOCK
Price: $66.50
IN STOCK
 

 

Astro Pneumatic logo  
Astro Pneumatic Tools
 
Astro
Model # 9401
Astro
Model # 9402
Astro
Model # 9406
Astro
Model # 9508
Astro
Model # 9589
Astro 9401 10pc. Snap ring plier set
Astro 9402 2pc. large snap ring set
Astro 7pc. Hose clamp plier kit
Astro 9508 8pc. Screwdriver set
tro 9589 4pc. Upholstery tool kit
Astro
10pc. Snap ring plier kit


  • Set Includes:
    -5-1/2" Bent pliers w/ .038" (1.0mm) tip
    -6" Straight pliers w/ .038" (1.0mm) tip
    -5-1/2" Bent pliers w/ .047" (1.2mm) tip
    -
    6" Straight pliers w/ .047" (1.2mm) tip
    -7-1/2"
    Bent pliers w/ .070" (1.8mm) tip
    -
    8" Straight pliers w/ .070" (1.8mm) tip
    -8-1/2" Bent pliers w/ .090" (2.3mm) tip
    - 9" Straight pliers w/ .090" (2.3mm) tip -1pc. 5" Hook tool
    -1pc. 5" Pick tool

Astro
2pc. Large snap ring kit


  • Internal/External heavy duty circlip pliers set features:
  • Replaceable points & spring ratchet locking mechanism to securely hold against circlip tension
  • Internal: 3-1/16 -6-1/4" (78mm-159mm)
    -Tip diameter: 0.12" (3mm)
  • External: 3-1/2 -6-1/2" (89mm-159mm)
    -Spread: 3-1/4" (85mm)
    -Length 16" (400mm)
    -Tip size: 0.12" (3.0mm) - 0º, 45º, 90º Set
Astro
7pc. Hose clamp plier kit


  • Swivel jaw hose
  • clamp pliers
  • Swivel jaw hose clamp pliers
  • Angled flat band hose clamp pliers
  • Hose remover pliers
  • Clic-R collar pliers
  • Flat band hose clamp pliers
  • Plastic storage case included
Astro
8pc. Screwdriver set


  • Go-Through construction provides greater striking force
  • Magnetic tips
  • Hexagon shaft
  • Set includes (1ea):
         Slotted (Blue)
    -3/8" x 8"   
    -5/16" x 6"     
    -1/4" x 4"
    -1/4" x 1-1/2"  
         Philips (Green)
    -#3 x 10" 
    -#2 x 4"  
    -#1 x 3"    
    -#2 x 1-1/2"
  • Plastic tray included
Astro
4pc. Upholstery tool set


  • 1pc. 9-1/4" Bent handle door panel remover
  • 1pc. 9-1/2" plastic fastener remover
  • 1pc. 10" Door upholstery remover
  • 1pc. 20-3/4" Door panel tool
  • Full polish chrome plated shanks for long lasting corrosion resistance
  • Plastic tray included
Price: $19.00
IN STOCK
Price: $63.50
IN STOCK
Price: $92.75
IN STOCK
~Discontinued
Price: $25.25
IN STOCK
Astro
Model # 9020
Astro
Model # 7863
Astro
Model # 7865
Astro
Model # 7868
Astro
Model # 7897
Astro 9020 20pc. wire brush kit
Astro 7863 7pc. Axle nut socket set
Astro 7865 Ball joint service kit
Astro 7868 Ball joint adaptor set
Astro 7897 Ball joint master set
Astro
20pc. Wire bore
brush kit

  • Set includes 1pc. brush each in stainless steel, brass & nylon in the following sizes: 1/4, 3/8", 1/2",
    5/8", 3/4" & 1"
  • Set includes an extension adapter w/ quick disconnect chuck
  • Soft-grip handle w/ quick disconnect chuck
  • All brushes have a 1/4" hex quick disconnect shank
  • Storage pouch included
Astro
7pc. Axle nut impact socket set

  • 1/2" drive
  • Kit Includes:
    1pc. 29mm deep
    1pc. 30mm deep
    1pc. 32mm deep
    1pc. 34mm deep
    1pc. 35mm deep
    1pc. 36mm deep
    1pc. 38mm
    deep
  • Plastic storage case included
Astro
Ball joint service tool kit
w/ 4WD adaptors

  • Set contains C-frame press, 3 receiver tubes sizes: 2-3/4" x 3", 2-1/4" x 2-1/2" & 1-3/4" x2", installation & removing adapters ‧ Set also includes: 4WD ball joint service kit that allows service for 1967 thru current 1/2 & 3/4 ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC & Jeep vehicles)
  • Plastic storage case included
Astro
Master ball joint
adaptor set

  • Includes all the receiving tubes & removing/installing adapters needed to work on most GM, Ford & Dodge 2 & 4WD pick-ups, vans, & SUV's through 1997
  • Works on press-fit upper & lower ball joints
  • Set also includes live center forcing screw plug
  • Plastic storage case included
Astro
Ball joint service & master adaptor set

  • Removes & replaces ball joints
  • C-frame press alone can be used to remove & replace universal joints
  • Set includes all the receiver tubes & removing/installing adapters needed to work on press-fit upper & lower ball joints on most GM, Ford, & Dodge 2 & 4WD pickups, vans & SUV's through 1997
  • Also included is the live center forcing screw plug
  • Plastic storage case included
Price: $13.75
IN STOCK
~Discontinued
Price: $56.50
IN STOCK
Price: 52.75
IN STOCK
Price: $112.50
IN STOCK
 

 

 

power probe logo      
Power Probe Testing Tools
Click on tool for larger image
Power Probe
Model # PP319FTC
Power Probe
Model # PP3LS01
Power Probe
Model # ECT2000
Power Probe
Model # PPCT
Power Probe III kit
Power Probe III with lead set
Power Probe ECT2000 tester
Power Probe Scream'N tester

Power Probe
PP III circuit tester

  • Volt meter - backlit screen
  • Built-in flashlight
  • Short circuit indicator
  • Relay & component tester
  • Continuity tester
  • 42 volt ready
  • Bad ground indicator
  • Kit includes:
    -Power Probe III
    -Cigarette lighter adapter
    -3" extention probe
    -Battery hook-up clips
    -20 ft. extention lead
    -Instruction manual
    -Plastic carrying case

Power Probe
PP III circuit tester with lead set

  • Kit contains:
    -Power Probe III circuit tester (model # PP319)
    - The PPLS01 Gold Series Lead Set: Two self centering piercing probes handle wires from 28-8awg. Stackable 1’, 3’, & 6’ ft leads enable you to customize your leads from 1-10ft. Compatible with both the PP319 & the ECT2000
  • Plastic carrying case

Power Probe
Wireless short finder kit

  • Makes locating short & open circuits easy
  • Consists of 2 units, a "SMART" transmitter and a "SMART" receiver along with 4 of the most common adapters to get you connected to any electrical circuit on the vehicle.
  • Detects power through carpet, molding, & plastic panels.
  • Adjustable sensitivity w/ audible & visual indicators for easy monitoring
  • Includes a demonstration CD/ instructions
  • Plastic carrying case

Power Probe
Scream'N continuity tester

  • 100% tone indicator, 3-level continuity testing
  • Tests: Diodes, Bad Connections, Power-on Circuits & Continuity (now)
  • Scream'N Loud! - to eliminate the frustration of working with weak sounding continuity testers.
  • Emits two distinct tones differentiating between circuits above or below 10 ohms. The SCT also emits a warble tone when it detects over 6 volts.
  • Adjustable volume control
  • 10 foot long green lead keeps everything within reach
  • Powered by two AA batteries
  • Automatic shut-off will maximize battery life.
Price: $99.50
IN STOCK
Price: $124.50
IN STOCK
Price: $112.50
IN STOCK
Price: $46.50
IN STOCK
 

 

 

 

Clore & MityVac
Click on tool for larger image
Mityvac
Model # MV6830
Mityvac
Model # MV7201
Mityvac
Model # MV7300
Mityvac
Model # MV6400
Mityvac MV6830 Vacuum Brake Bleeder
Mityvac MV7201 fluid evacuator-dispenser
Mityvac MV7300 PneumatiVac Pneumatic Fluid Evactuator
MityVac MV6400
MityVac
Vacuum Brake Bleeder
  • The compressed-air-operated MV6830 offers professional grade brake & clutch bleeding performance. This compact yet powerful unit bleeds up to 2 quarts (1.9 liters) per minute, and its simple operation allows clean, quick bleeding of brake & clutch lines. Kit includes an advanced selection of accessories that ensure maximum convenience & performance for greater productivity.
  • Integrated 1.9 quart (1.8 liter) capacity fluid collection reservoir.
MityVac
Fluid Evacuator-Dispenser

  • This versatile unit changes from vacuum to pressure for evacuating or dispensing fluids. This functionality makes it ideal for draining tanks or reservoirs then pumping the used fluid back out for easy disposal. Multiple units work great, simply evacuate used fluids with one unit, and then quickly refill with new fluid from a second. For superior mobility, the 7201 utilizes a manual pump, so compressed air or electricity is not required. Accessories are included for draining engine oil or transmission fluid directly through the dipstick tubes.
  • 2.3gallon (8.8L) tank size
MityVac
Pneumatic Fluid Evacuator
  • Operates on compressed air to create a powerful venturi vacuum for draining fluids from tanks & reservoirs. Includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes. Also includes brake/clutch bleeding kit for vacuum bleeding hydraulic brake and clutch systems.
  • 2.3gallon (8.8L) tank size
MityVac
Fluid Dispensing System
  • Fluid is dispensed under pressure for smooth continual flow
  • Integrated manual pump adds air above the fluid level to prevent aeration
  • Internal pump components are sealed against exposure to fluids
  • ON/OFF and flow control valve are conveniently located near fluid output
  • Reservoir lid w/ integrated manual pump, pressure guage, and pressure relief valve
  • 5' Fluid dispensing hose w/ flow control and auto-shutoff valves, Fluid dispensing wand & Hanging hook included.
  • 1.2gallon (5.0L) tank size
Price: $110.50
IN STOCK
Price: $85.25
IN STOCK
Price: $86.50
IN STOCK
Price: $116.50
IN STOCK
Click on tool for larger image
Mityvac
Model # MV6410
Mityvac
Model # MVA6832
Mityvac
Model # MV6840
Mityvac
Model # MVA7216
MityVac MV6410 kit
MityVac MVA6832 Clamp-on auto refill kit
MityVac MV6840 pressure bleed system
MityVac MV7216 ATF refill kit
MityVac
Fluid Dispensing System Kit

  • Same as the MityVac MV6400 kit
  • MV6410 ALSO INCLUDES
    the following:
    -Includes ten adapters to connect to Ford, Toyota, BMW, Honda, Nissa, VW, Audi, Mercedes, and Volvo transmissions
MityVac
Clamp-on auto-refill kit
  • Mounts onto cars master cylinder & automatically maintains the proper level of new brake fluid as you vacuum bleed the system.
  • On/Off valve to control the flow of fluid.
  • Adjustable fluid level control allows you to adjust the unit to dispense fluid
  • Includes:
    -40oz (1.2 l) reservoir
    -2 adaptors to use 12oz & 32oz bottles
MityVac
Pressure bleed system

  • Large 1.2-gallon (5-liter) fluid capacity
  • Integrated safety & manual pressure relief valve
  • Utilizes push-to-connect, quick-change
    style accessory connections
  • Includes:
    -Seven (7) master cylinder
    adapters for most American, Asian, & European cars & light trucks
    -Hanging hook
    -Reservoir lid w/ integrated manual pump,
    pressure gauge, & pressure relief valve
    -5' (1.5 m) Fluid dispensing hose w/ flow
    control & auto-shutoff valves
    - Fluid dispensing wand
    - Storage case
MityVac
ATF Refill kit

  • Ten (10) adapters fit Ford, Toyota, BMW, Honda, Nissan, VW, Audi, & Mercedes transmissions.
  • Connects directly to the MV7201 fluid evacuator plus
  • Quick-change coupler allows fast adapter changes.
  • Connection hose w/ flow control valve & quick-change coupler
  • Includes custom-molded storage case for adapters
Price: $202.25
IN STOCK
Price: $42.50
IN STOCK
Price: $247.75
IN STOCK
Price: $104.75
IN STOCK
 
Mityvac
Model # MV4534
Mityvac
Model # MVA670
Lincoln
Model # MV8500
Lincoln
Model # 1162
MityVac MV4535 Universal cooling system kit
MItyVac MVA670 3pc. power steering adaptor kit
MityVac MV8500 Silverline elite hand vacuum and pressure pump kit
Lincoln 1162 grease gun
MityVac
Universal cooling system kit
  • High-volume hand-operated pump builds pressure quickly to locate leaks
  • Easy-to-read 2.5” diameter gauge-clearly indicated pressure test zones
  • Push-button valve safely relieves pressure when testing is complete
  • Includes:
    -Hand pressure pump
    -2.5” diameter gauge
    -Universal radiator adapter
    -Storage case
MityVac
3pc. Power steering adaptor kit
  • Theses adaptors are designed to connect to the MityVac MV8000 or MV8500 hand vacuum pumps to place a vacuum on the fluid reservoir
  • Adapters form an airtight seal in the neck of a vehicle’s power steering pump, allowing for air evacuation
  • All 3 adapters include an inline, barbed connection for a 1/4" internal dia. hose
  • Kit Includes:
    -Universal power steering bleed adapter (MVA660) 5/8" to 1-5/8" diameters
    -Ford power steering bleed adapter (MVA662)
    1-1/4" to 2"
    -GM power steering bleed adapter (MVA661)
    w/ a 2-tab cap design
MityVac
Silverline hand pump kit
  • Silverline Elite hand vacuum/ pressure pump w/ 2" compound gauge
  • Produces vacuum or pressure at the turn of a switch
  • 4.5 oz fluid bottle w/ fluid transfer & storage lids
  • 4 tapered adapters for connecting to tubing from .09 to .50" (2.3 - 13mm)
  • 2 tapered manifold plugs
  • 4 universal bleed screw adapters
  • 12 vacuum cap plugs
  • Vacuum line T-adapter
  • 2 - 1/4" ID x 24" (6.1 x 610mm) connection tubes
  • 5/32 x 1/4" (4 x 6.4mm) ID tubing adapter
  • 3 connection tubes
  • rubber cupped adapter
  • master cylinder refill kit
  • Storage case
Lincoln
Air operated grease gun
  • Fully automatic/ continous
  • Variable sped trigger
  • 30" high-pressure hose
  • Filler nippe & bleeder valve
  • Check valve assembly
  • Flow: 40:1 @ 150psi
  • Max grease pressure:
    - 6,000psi
  • Air pressure range:
    - 40 - 150psi
  • Weight: 5.30 lbs.
Price: $81.75
IN STOCK
Price: $55.50
IN STOCK
Price: $49.50
IN STOCK
Price: $60.75
IN STOCK
Clore & Assosicated Products
Clore Automotive
Model # JNC660
Clore Automotive
Model # ES5000
 
Clore JNC660 booster pack
Clore ES5000 battery booster pack
Clore Automotive
12volt jump starter
  • Jump-N-Carry JNC660
  • 1,700 peak amps
  • 425 cranking amps
  • 46" #4 AWG cable leads
  • Industrial-grade clamps
  • Voltmeter provides charge status of onboard battery
  • Built-in charger
  • 12VDC AUX power outlet
  • Weight: 18.00 lbs.
  • Includes:
    -AC power adaptor
    -12v cigerette lighter plug extension cord
Clore Automotive
12volt jump starter
  • Clore Automotive ES5000
  • 1,500 peak amps
  • 400 cranking amps
  • 43" #4 AWG cable leads
  • Industrial-grade clamps
  • LED indicator display status
  • 12VDC AUX power outlet
  • Weight: 18.00 lbs.
  • Includes:
    -AC power adaptor
    -12v cigerette lighter plug extension cord
Price: $111.50
IN STOCK
Price: $115.75
IN STOCK
Click on tool for larger image
Associated
Model # US20
Associated
Model # 6002B
Associated
Model # 6006
Associated
Model # ESS6008
Associated US20 battery charger-booster
Associated 6002B battery charger-booster
Associated 6006 battery charger-booster
Associcated ESS6008 battery charger-booster
Associated
6/ 12volt jump starter
  • Charger & 40 amp power supply
  • 200 amp cranking assist with a full 330 amp manufacturer's boost rating
  • 40 amp continous rating at 12 volts
  • 90 minute timer with hold
  • Fan cooled mechanism prevents overheating
  • Ideal for te small shop or do-it-yourselfer
  • Leadset: 6.00' 6.50 AWG
  • Clamp rating: 400 amps
  • UL Cranking assist rating: 200 amp
  • "safe in any weather" operation
  • UL listed
  • Weight: 35lbs.
  • MADE IN THE USA
  • Includes:
    -Wheels
    -Chrome-plated handle
Associated
6/12/18/24volt HD fleet charger
  • Charger & 80 amp power supply
  • 400 amp cranking assist with a full 725 amp manufacturer's boost rating
  • 80 amp continous rating at 12 volts
  • Automatic timer
  • Automatic reset AC & DC breakers
  • Fan cooled mechanism prevents overheating
  • Leadset: 8' 4.00 AWG
  • Clamp rating: 500 amps
  • UL Cranking assist rating: 400 amp
  • 7" tires
  • "safe in any weather" operation
  • UL listed
  • Weight: 70lbs.
  • MADE IN THE USA
  • Includes:
    -Wheels
    -Chrome-plated handle
Associated
6/12/24 volt jump starter
  • Charger & 70 amp power supply
  • 280 amp cranking assist with a full 600 amp manufacturer's boost rating
  • 70 amp continous rating at 12 volts
  • Automatic timer
  • Multi-diode rectifiers
  • Fan cooled mechanism prevents overheating
  • Leadset: 7' 4.00 AWG
  • Clamp rating: 500 amps
  • UL Cranking assist rating: 280 amp
  • 7" tires
  • "safe in any weather" operation
  • UL listed
  • Weight: 53lbs.
  • MADE IN THE USA
  • Includes:
    -Wheels
    -Chrome-plated handle
Associated
Intellamatic 12Volt jump starter
  • Charger & 70 amp power supply
  • Designed for: Standard, Deep-cycle, AGM, GEL cell Spiral Cell, Orbital, or Optima batteries
  • ESS Electronic Stability System turns this into a stable power supply for extended service procedures or re-flashes
  • Diagnostics indicate weak or defective battery
  • Leadset: 6-1/2' 6.50 AWG
  • Clamp rating: 400amps
  • UL Cranking assist rating: 270 amp
  • Nominal 13.7volt DC output
  • "safe in any weather" operation
  • CSA listed
  • MADE IN THE USA
  • Includes:
    -Wheels
    -Chrome-plated handle
Price: $215.75
IN STOCK
Price: $667.75
IN STOCK
FREE SHIPPING!
Price: $405.50
IN STOCK
FREE SHIPPING!
Price: $565.50
IN STOCK
FREE SHIPPING!
 

 

 

Streamlight logo      
Streamlight Flashlights
Click on tool for larger image
Streamlight
Model # 75043
Streamlight
Model # 75073
Streamlight
Model # 75732
Streamlight
Model # 75832
Streamlight Stinger 75043 - Red
Streamlight Stinger 75073 - Blue
Streamlight Stinger C4 LED 75732
Streamlight Stinger C4 LED Dual switch 75832

Streamlight
Stinger - RED w/ PiggyBack charging station

  • 6-watt Xenon gas-filed bulb
  • 15,000 candlepower
  • Adjustable beam focus
  • Spare bulb in the end cap
  • Machined aluminum
  • Piggyback charging system
    -charges light & spare battery simultaneously
  • Anodized against corrosion
  • Length: 7-3/8"
  • Weight: 10.00 oz.
  • Kit includes:
    -RED Stinger flashlight
    -2 batteries
    (3-cell, 3.6 Volt Nickel cadmium sub-C battery)
    -PiggyBack charger
    -AC charger cord
    -DC charger cord
    -Instruction manual

Streamlight
Stinger - BLUE w/ PiggyBack charging station

  • 6-watt Xenon gas-filed bulb
  • 15,000 candlepower
  • Adjustable beam focus
  • Spare bulb in the end cap
  • Machined aluminum
  • Piggyback charging system
    -charges light & spare battery simultaneously
  • Anodized against corrosion
  • Length: 7-3/8"
  • Weight: 10 oz.
  • Kit includes:
    -BLUE Stinger flashlight
    -2 batteries
    (3-cell, 3.6 Volt Nickel cadmium sub-C battery)
    -
    PiggyBack charger
    -AC charger cord
    -DC charger cord
    -Instruction manual

 

Streamlight
Stinger - C4 LED
w/ PiggyBack charging station

  • 3 Watt Super High-Flux LED
  • Single push-button switch
  • Piggyback charging system
    -charges light & spare battery simultaneously
  • 4 lighting modes: High, Medium, low & strobe mode
  • Length: 8-3/8"
  • Weight: 12.40 oz.
  • Kit includes:
    -BLACK Stinger LED flashlight
    -2 batteries
    (3-cell, 3.6 Volt Nickel cadmium sub-C battery)
    -
    PiggyBack charger
    -AC charger cord
    -DC charger cord
    -anti-roll rubber ring
    -Instruction manual

Streamlight
Stinger - C4 LED DualSwitch
w/ PiggyBack charging station

  • 3 Watt Super High-Flux LED
  • Fully independent dual switch - both push-button (head) & tail cap switching
  • Piggyback charging system
    -charges light & spare battery simultaneously
  • 4 lighting modes: High, Medium, low & strobe mode
  • Length: 8-7/8"
  • Weight: 12.80 oz.
  • Kit includes:
    -BLACK Stinger LED flashlight
    -2 batteries
    (3-cell, 3.6 Volt Nickel cadmium sub-C battery)
    -
    PiggyBack charger
    -AC charger cord
    -DC charger cord
    -anti-roll rubber ring
    -Instruction manual
Price: $104.50
IN STOCK
Price: $104.50
IN STOCK
Price: $111.50
IN STOCK
Price: $114.50
IN STOCK