• 3/4" drive electric impact
• 433 ft. lbs. max torque
• Full-power in reverse
• 9.0 amp motor
• 11 lbs.
• Side handle & steel carrying case included

Bosch
4-1/2" Angle grinder

• 4-1/2" angle grinder
• Paddle Switch style
• 11,500 RPM
• 10.00 amp motor
• 5/8"-11 spindle
• Tool weight: 4.60 lbs.
• Epoxy coated field windings
• Vibration-absorbing handle
• Tool-free adjustable guard
• Spindle lock
• Guard, flanges, wrench, & grinding wheel included

Bosch
6" Angle grinder

• 6" angle grinder
• Locking on-off switch style
• 9,300 RPM
• 12.50 amp motor
• 5/8"-11 spindle
• Soft-start circuitry
• Epoxy coated field windings
• Kickback Stop clutch
• Vibration-absorbing handle
• Tool-free adjustable guard
• Spindle lock
• Guard, flanges, wrench, & grinding wheel included

Metabo
4-1/2" Angle grinder

• 4-1/2" angle grinder
• Locking on-off switch style
• 10,500 RPM
• 8.50 amp motor
• 5/8"-11 spindle
• Metabo Marathon motor
• Automatic torque limiting clutch
• "Quick" change flange nut
• Vibration-absorbing handle
• Tool-free adjustable guard
• Spindle lock
• Guard, Quick-nut, & grinding wheel included

Metabo
6" Angle grinder "Excalibur"

• 6" angle grinder
• Locking on-off switch style
• 9,600 RPM
• 13.50 amp motor
• Epoxy coated field windings
• 5/8"-11 spindle
• Automatic torque limiting clutch
• "Quick" change flange nut
• Vibration-absorbing handle
• Tool-free adjustable guard
• Spindle lock
• Guard, Quick-nut, & grinding wheel included

Makita
5" Angle grinder

• 5" angle grinder
• Locking on-off switch style
• Variable speed:
  2,800 - 10,500 RPM
• Soft-start circuitry
• 12.00 amp motor
• Electronic current limiter
• 5/8"-11 spindle
• Spindle lock
• Length: 11.75"
• Weight: 5.20 lbs.
• Varnish-coated armature
• Mechanical clutch system that helps prevent motor & gear damage
• Tool-free adjustable guard
• Guard, flanges, wrench, & grinding wheel included

Makita
6" Angle grinder

• 6" angle grinder
• Locking on-off switch style
• Variable speed:
  4,000 - 9,000 RPM
• Soft-start circuitry
• 12.00 amp motor
• Electronic current limiter
• 5/8"-11 spindle
• Spindle lock
• Length: 11.75"
• Weight: 5.30 lbs.
• Varnish-coated armature
• Mechanical clutch system that helps prevent motor & gear damage
• Tool-free adjustable guard
• 2 guards, flanges, wrench, & grinding wheel included

Makita
7" Vertical sander

• 7" verticle sander
• Motor-over-pad design for better balance & control
• Locking on-off switch style
• Variable speed:
  2,500 - 4,700 RPM
• 7.90 amp motor
• Advanced electronics include soft start & electronic speed control
• 5/8"-11 spindle
• Spindle lock
• Length: 11.75"
• Weight: 4.60 lbs.
• 7" rubber backing pad, side handle, wrenches, & sanding discs (80g) included

Makita
7-1/4" Circular saw

• 7-1/4" circular saw
• AC/DC switch
• 5,800 RPM
• 15.00 amp motor
• 5/8" arbor
• Spindle lock
• Bevel cuts 0-45°
• Max. cutting cap (at 90°):
  2-3/8"
• Max. cutting cap. (at 45°):
  1-3/4"
• Length: 12.00"
• Weight: 11.10 lbs.
• Two built-in LED lights illuminate the line of cut for increased accuracy
• 7-1/4" 24tooth blade, wrench included

Milwaukee
7/9" Angle grinder

• 7/9" angle grinder
• Lock-on/off switch--for extended use applications
• AC/DC capability
• 5,000 RPM
• 3.50 horsepower
• 15 amp motor ; 2,300 watts
• 5/8"-11 spindle
• Weight: 12.00 lbs.
• Length: 17.50"
• Side handle included

Milwaukee
9" Angle grinder

• 7/9" angle grinder
• Lock-on/off switch--for extended use applications
• AC/DC capability
• 6,000 RPM
• 3.50 horsepower
• 15 amp motor ; 2,300 watts
• 5/8"-11 spindle
• Weight: 12.00 lbs.
• Length: 17.50"
• Side handle included

Metabo
7" Angle grinder

• 7" angle grinder
• Metabo safety switch: safety lock against unintentional start
• Rear handle is rotatable without tools
• 8,500 RPM
• 15 amp motor ; 2,400 watts
• 5/8"-11 spindle
• Metabo Marathon motor with Metabo protection grid
• Auto-stop carbon brushes
• Tool-free adjustable guard
• Vibration-absorbing handle
• Spindle lock
• 7" guard included

Metabo
9" Angle grinder

• 9" angle grinder
• Metabo safety switch: safety lock against unintentional start
• Rear handle is rotatable without tools
• 6,600 RPM
• 15 amp motor ; 2,300 watts
• 5/8"-11 spindle
• Metabo Marathon motor with Metabo protection grid
• Auto-stop carbon brushes
• Vibration-absorbing handle
• Tool-free adjustable guard
• Spindle lock
• 9" guard included

Makita
5" Angle grinder

• 5" angle grinder
• 10,000 RPM
• 9 amp motor
• 5/8"-11 spindle
• Lock-on button for continuous operation
• Spindle lock
• Weight: 6.60 lbs
• All-ball bearing construction
• 5" guard, flanges, wrench, & side handle included

Makita
7" Angle sander

• 7" angle grinder
• Locking on-off switch style
• 6,000 RPM
• 15 amp motor
• Extra heavy-duty motor for high production & continuous use
• AC/DC switch for use with alternative power source
• 5/8"-11 spindle
• All ball & needle construction for long life
• Spindle lock
• Flange wrench & grinding wheel included
• Accepts 7" or 9" wheel with correct guards

Bosch
9" Angle grinder

• 9" angle grinder
• Lock-on/off switch--for extended use applications
• Vibration control side & main handles--reduces vibration up to 60%
• AC/DC capability
• 6,000 RPM
• 15 amp motor ; 2,300 watts
• 5/8"-11 spindle
• Epoxy-coated field windings
• Auto-stop carbon brushes
• Tool-free adjustable guard
• Vibration-absorbing handle
• Spindle lock
• 9" guard, flanges & wrench included

Metabo
4-1/2" Slicer Plus cut-off wheel

• Heavy duty performance on steel & stainless steel applications.
• Cut-off wheel specifications:
  -Diameter: 4-1/2"
  -Thickness: .045"
  - Arbor hole: 7/8"
  -Type 1 wheel profile
  -cutting only
  -Max. speed: 15,000rpm
• Packaged: 50 pieces/ box

Metabo
6" Slicer Plus cut-off wheel

• Heavy duty performance on steel & stainless steel applications.
• Cut-off wheel specifications:
  -Diameter: 6"
  -Thickness: .045"
  - Arbor hole: 7/8"
  -Type 1 wheel profile
  -cutting only
  -Max. speed: 10,200rpm
• Packaged: 50 pieces/ box

Metabo
4-1/2" x 1/4" grinding wheel

• Heavy duty performance on steel & stainless steel applications.
• Cut-off wheel specifications:
  -Diameter: 4-1/2"
  -Thickness: 1/4"
  - Arbor hole: 7/8"
  -Type 27 wheel profile
  -Max. speed: 13,300rpm
• Packaged: 25 pieces/ box

Metabo
7" x 1/4" grinding wheel

• Heavy duty performance on steel & stainless steel applications.
• Cut-off wheel specifications:
  -Diameter: 7"
  -Thickness: 1/4"
  - Arbor hole: 7/8"
  -Type 27 wheel profile
  -Max. speed: 8,500rpm
• Packaged: 50 pieces/ box

Makita
2" Straight die grinder

• 2" straight die grinder
• AC/DC SLIDE-TYPE locking switch for use with alternative power source
• 25,000 RPM
• 4.50 amp motor
• 1/4" collet capacity
• Maximum capacity mounted for wheels & points: 1-5/8"
• Maximum capacity for cut-off wheels: 2"
  
• Length: 14.25"
• Weight: 3.70 lbs.
• 1/4" collet & collet nut wrench set included

Metabo
2" Straight die grinder

• 2" straight die grinder
• SLIDE-TYPE locking switch
• Variable sped dial
• 10,000 - 30,500 RPM
• 6.40 amp motor
• 1/4" collet capacity
• Spindle lock for easy tool change
• Maximum capacity mounted for wheels & points: 1-5/8"
• Maximum capacity for cut-off wheels: 2"
  
• Length: 13.75"
• Weight: 4.10 lbs.
• 1/4" collet & collet nut wrench included

Metabo
3" Straight die grinder

• 3" straight die grinder
• SLIDE-TYPE locking switch
• Variable speed dial
• 2,500 - 8,700 RPM
• High torque geared motor
• 8.50 amp motor
• 1/4" collet capacity
• Spindle lock for easy tool change
• Maximum capacity mounted for wheels & points: 2-5/8"
• Maximum capacity for cut-off wheels: 3"
  
• Length: 14.00"
• Weight: 4.30 lbs.
• 1/4" collet & collet nut wrench included

Milwaukee
2" Straight die grinder

• 2" straight die grinder
• Toggle on-off switch style
• 21,000 RPM
• 4.50 amp motor
• 1/4" collet capacity
• Maximum capacity mounted for wheels & points: 1-5/8"
• Maximum capacity for cut-off wheels: 2"
  
• Length: 13.50"
• Weight :4.50 lbs.
• 1/4" collet & collet nut wrench set included

Bosch
16 gauge shear

• 16 gauge cutting capacity
• SLIDE-TYPE locking switch
• 4.20 amp motor
• 5,000 SPM
• Epoxy coated field windings

• Curve Cutting-Minimum Radius: 7/8"

  Cutting Capacity-Aluminum: 14 Gauge (.075")

  Cutting Capacity-Mild Steel: 16 Gauge (.060")

  Cutting Capacity-Stainless Steel: 20 Gauge

• Length: 7.50"
• Weight:4.60 lbs.
• Includes: blade set, feeler gauge, steel deflector, & allen wrench

Milwaukee
16 gauge shear

• 16 gauge cutting capacity
• PADDLE-type switch
• 120 volt AC/DC switch
• 4.00 amp motor
• 4,000 SPM
• Planetary gear drive

• Minimum Radius Right: 1"

  Minimum Radius Left: 1/2"

  Cutting Capacity-Mild Steel: 16 (.060")

  Cutting Capacity-Stainless Steel: 18 (.042")

• Length: 10.25"
• Weight: 4.80 lbs.
• Includes: blade set & allen wrench

Milwaukee
14 gauge shear

• 14 gauge cutting capacity
• PADDLE-type switch
• 120 volt AC/DC switch
• 5.00 amp motor
• 4,000 SPM
• Planetary gear drive

• Minimum Radius Right: 1"

  Minimum Radius Left: 3/4"

  Cutting Capacity-Mild Steel: 14 (.075")

  Cutting Capacity-Stainless Steel: 16 (.060")

• Length: 10.25"
• Weight: 5.00 lbs.
• Includes: blade set & allen wrench

Milwaukee
16 gauge nibbler

• 16 gauge cutting capacity
• PADDLE-type switch
• 120 volt AC/DC switch
• 3.80 amp motor
• 1,900 SPM
• Planetary gear drive
• Starting hole: 7/8" (0.87")

• Minimum Radius: 1-3/4"

  Cutting Capacity-Mild Steel: 14 (.075")

  Cutting Capacity-Stainless Steel: 18 (.042")

• Length: 11.25"
• Weight: 6.00 lbs.
• The cutter can be set in 8 positions
• Includes: punch & die & allen wrench

Makita
18 gauge shear

• 18 gauge cutting capacity
• Variable speed trigger w/ lock-on button for continuous operation
• 0-2,500 SPM
• 6.50 amp motor
• Pistol grip design for more comfort

• Curve Cutting-Minimum Radius: 1-3/16"

  Cutting Capacity-Aluminum: 13 Gauge (.085")

  Cutting Capacity-Mild Steel: 18 Gauge (.060")

  Cutting Capacity-Stainless Steel: 20 Gauge

• Shear head rotates 360°
• Retractable belt clip allows operation in tight areas
• Length: 11.875"
• Weight: 3.90 lbs.
• Includes: blade set & allen wrench

Makita
5/16" Fiber cement shear

• 5/16" cutting capacity
• Variable speed trigger w/ lock-on button for continuous operation
• 0-2,500 SPM
• 6.50 amp motor
• Solid steel blades cut clean & straight lines with a maximum cutting capacity up to 5/16"
• Retractable tool hook allows user to work in tight spaces
• Length: 13.675"
• Weight: 4.80 lbs.
• Includes: blade set, & allen wrench, & carrying case

Makita
16 gauge shear

• 16 gauge cutting capacity
• SLIDE-TYPE locking switch
• 4,000 SPM
• 3.30 amp motor
• Large easily replaceable blades w/ 8 cutting edge ea.

• Curve Cutting-Minimum Radius: 1-3/16"

  Cutting Capacity-Aluminum: 13 Gauge (.085")

  Cutting Capacity-Mild Steel: 16 Gauge (.060")

  Cutting Capacity-Stainless Steel: 18 Gauge

• Built-in thickness gauge for added convenience
• Barrel grip diameter: 2-1/4”
• Length: 12.50"
• Weight: 3.40 lbs.
• Includes: blade set, feeler gauge, steel deflector, & allen wrench

Makita
10 gauge shear

• 10 gauge cutting capacity
• Lock-on switch
• 1,600 SPM
• 6.20 amp motor
• Built-in thickness gauge for convenience
• Large, easily replaceable blades w/ 8 cutting edges ea
• Engineered to cut w/o the material loss in kerf typically associated with nibblers

  Cutting Capacity-Mild Steel: 10 ga.

  Cutting Capacity-Most Aluminum: 9 ga.

  Cutting Capacity-Stainless Steel: 13 ga

  Cutting Radius: 2.00"

• Length: 8.40"
• Weight: 7.40 lbs.
• Includes: blade set & wrenches

Makita
16 gauge nibbler

• 16 gauge cutting capacity
• Lock-on sliding switch
• 2,200 SPM
• 5.00 amp motor
• Built-in thickness gauge for convenience
• Die rotates 360°; large 1/4" stroke

• Cutting Capacity-Mild Steel: 16 ga.

  Cutting Capacity-Most Aluminum: 10 ga.

  Cutting Capacity-Stainless Steel: 18 ga

  Cutting Radius inner-edge: 1.75" Cutting Radius outer-edge: 2.00"

• Length: 10.25"
• Weight: 3.60 lbs.
• Includes: blade set & wrenches

Makita
10 gauge nibbler

• 10 gauge cutting capacity
• Lock-on switch
• 1,300 SPM
• 6.20 amp motor
• Built-in thickness gauge for convenience

  Cutting Capacity-Mild Steel: 10 ga.

  Cutting Capacity-Most Aluminum: 10 ga.

  Cutting Capacity-Stainless Steel: 13 ga

  Cutting Radius: -Inner edge: 4-3/4" -Outer edge: 5-1/16"

• Length: 8.50"
• Weight: 7.50 lbs.
• Includes: Punch- die, & wrenches

Bosch
36 volt SDS rotary hammer

• SDS-PLUS BIT SYSTEM
• 1-1/8" diameter drilling
• Impact energy (ft. lbs.): 2.4
• Max Cap. in concrete: 1-1/8"
• Max Cap. in wood: 1-1/2"
• No load RPM: 940rpm
• Variable speed trigger control w/ reverse
• 3 modes of operation: regular drilling, rotary hammer & chipping mode
• Vibration control
• KickBack control to help with bind-up situations
• Electronic precision control for smooth starts
• Vario-Lock positioning to rotate the chisel 360°
• Built-in LED light
• Integral clutch
• Tool Length: 13.50"
• Tool Weight: 9.60 lbs.
• Includes 2 Lithium-Ion 36V batteries, charger, side handle, & carrying case

Bosch
Top handle jigsaw

• T-shank jigsaw blades
• Lock-on switch
• 7.00 amp motor
• Variable speed:
  500- 1,300 SPM
• Constant Response circuitry
• Cutting capacities:

  Cutting Capacity-Soft Wood: 5-7/8" Cutting Capacity-Mild Steel: .375

  Cutting Capacity-Most Aluminum: .875

  Max bevel cut: 45º

• Toolless blade-change system
• Four orbital-action settings
• Dust collection
• Dust blower w/ on/off switch
• Length: 8.50"
• Weight: 5.60 lbs.
• Includes: (1) blade, (1) anti-splinter insert , (1) plastic overshoe, (1) bevel wrench, (1) carrying case

Bosch
1-9/16" SDS-MAX
Rotary hammer

• SDS-MAX BIT SYSTEM
• 1-9/16" diameter drilling capacity with spiral drill bit
• 4"diameter drilling with CORE BIT
• Optimal Concrete Capacity Range: 1/2" - 1-3/8"
• Impact Energy (ft. lbs.): 6.1
• 12 amp motor
• 2 modes of operation: rotary hammer & chipping/hammer mode
• Integral clutch
• Tool Weight: 15.00 lbs.
• Side handle & carrying case included

Bosch
1-5/8" SDS-MAX
Rotary hammer

• SDS-MAX BIT SYSTEM
• 1-5/8" diameter drilling capacity with spiral drill bit
• 4-1/8"diameter drilling capcity with CORE BIT
• Optimal Concrete Capacity Range: 1/2" - 1-1/2"
• Impact energy (ft. lbs.): 7.4 8.1 (turbo-mode)
• Turbo Power; 20% more power in chipping mode.
• 13 amp motor
• Variable speed control
• 2 modes of operation: rotary hammer & chipping/hammer mode
• Anti-Vibration -vibration reduction in the hammer mechanism & the grip area.
• Integral clutch
• Tool Weight: 15.10 lbs.
• Side handle & carrying case included

Bosch
1-9/16" SPLINE-DRIVE
Rotary hammer

• SPLINE BIT SYSTEM
• 1-9/16" diameter drilling capacity with spiral drill bit
• 4"diameter drilling with CORE BIT
• Optimal Concrete Capacity Range: 1/2 - 1-3/8
• Impact Energy (ft. lbs.): 6.1
• 12 amp motor
• 2 modes of operation: rotary hammer & chipping/hammer mode
• Integral clutch
• Tool Weight: 15.00 lbs.
• Side handle & carrying case included

Bosch
1-5/8" SPLINE-DRIVE
Rotary hammer

• SPLINE BIT SYSTEM
• 1-5/8" diameter drilling capcity with spiral drill bit
• 4-1/8"diameter drilling capacity with CORE BIT
• Optimal Concrete Capacity Range: 1/2" - 1-1/2"
• Impact energy (ft. lbs.): 7.4 8.1 (turbo-mode)
• Turbo Power; 20% more power in chipping mode.
• 13 amp motor
• Variable speed control
• 2 modes of operation: rotary hammer & chipping/hammer mode
• Anti-Vibration -vibration reduction in the hammer mechanism & the grip area.
• Integral clutch
• Tool Weight: 15.10 lbs.
• Side handle & carrying case included

Bosch
2" SDS-MAX
Rotary hammer

• SDS-MAX BIT SYSTEM
• 2" diameter drilling capacity with spiral drill bit
• 6"diameter drilling capcity with CORE BIT
• Impact energy (ft. lbs.): 14.10 ft-lbs.
• 15.00 amp motor
• Variable speed control
• Turbo Power for torque & speed boost in hammer mode
• Constant Response Circuitry--Provides soft-start, maintains constant speed under load, provides overload protection
• 2 modes of operation:
  - rotary hammer drill mode
  -chipping/hammer mode
• Integral clutch
• Vibration Control for comfort in all-day applications
• Vario-Lock positioning--Rotates & locks chisel into 12 different positions to optimize working angle
• Tool Weight: 26.20 lbs.
• Tool length: 23.50"
• Side handle, bit grease, & carrying case included

Bosch
SDS-MAX
Demolition hammer

• SDS-Max BIT SYSTEM
• Impact Energy:
  9.6 ft/ lbs.
• 13.0 amp motor
• Variable speed dial
• Vibration dampening handle--Reduces vibration up to 40%
• Constant Response Circuitry--Provides soft-start, maintains constant speed under load, provides overload protection
• Power light-Ensures that power feed is live
• Vario-Lock positioning--Rotates & locks chisel into 12 different positions to optimize working angle
• 360° auxiliary handle
• Tool Weight: 13.60 lbs.
• Tool length: 18-1/2"
• Side handle, bit grease, & carrying case included

Bosch
SDS-MAX
Demolition hammer

• SDS-Max BIT SYSTEM
• Impact Energy:
  18.4 ft/ lbs.
• 14.0 amp motor
• Variable speed dial
• Padded rear handle--Reduces vibration
• Constant Response Circuitry--Provides soft-start, maintains constant speed under load, provides overload protection
• Power light--Ensures that power feed is live
• Vario-Lock positioning--Rotates & locks chisel into 12 different positions to optimize working angle
• 360° auxiliary handle
• Tool Weight: 22.50 lbs.
• Tool length: 22-1/2"
• Side handle, bit grease, & carrying case included

Bosch
35lb. "JACK"
Demolition hammer

• 2 way tool retainer--accepts standard 1-1/8" (28mm) hex, air tool steel with retaining collar or Bosch internal locking combo steel
• Impact Energy:
  34.00 ft/ lbs.
• 15.0 amp motor
• 360° articulating auxiliary Handle--provides a wide range of movement
• In-Line Design--Ultimate tool balance with multiple grip positions for maximum performance in angled, horizontal, & vertical applications
• Exclusive active vibration control
• Tool Weight: 34.00 lbs.
• Tool length: 30"
• 1 point chisel & Wheeled carrying case included

Bosch
BRUTE
Breaker hammer kit

• Impact Energy: 35.00 ft/ lbs.
• 15.0 amp motor
• Runs on any 115/120V AC/DC, 15-Amp outlet or 2,500-watt generator
• 1-1/8" hex chisel shank
• Active Vibration Control
• Ergonomic shock-absorbing handle
• Service Minder brush system shuts the tool off when brush replacement, lubrication or preventative maintenance is needed
• Grease-packed gearbox
• Decibel rating (dB): 105 Db
• Tool weight: 63.20 lbs.
• Tool length: 30-3/4"
• Basic cart, one moil point chisel, & one flat chisel

Bosch
TURBO BRUTE
Breaker hammer kit

• Impact Energy: 43.00 ft/ lbs.
• 15.0 amp motor
• Runs on any 115/120V AC/DC 15-Amp outlet or 2,500-watt generator
• 1-1/8" hex chisel shank
• Active Vibration Control
• Ergonomic shock-absorbing handle
• Service Minder brush system shuts the tool off when brush replacement, lubrication, or preventative maintenance is needed
• Grease-packed gearbox
• Decibel rating (dB): 105 Db
• Tool weight: 63.20 lbs.
• Tool length: 30-3/4"
• Includes: Deluxe hammer cart, 2 star point chisels, & 2 narrow chisels
  --Deluxe hammer cart doubles as a hammer hauler & a hand truck, truck rails allow cart to be raised or lowered from a truck.

Bosch
9 gallon vacuum kit
w/ HEPA filter & Fleece bag kit

• 9 gallon capacity
• Capable of wet & dry pick up
• No bulit-in drain
• 9.50 amp motor/ 120 vac
• Air flow: 150 CFM
• Air volume: 150 CFM
• Automatic shut-off
• Weight: 28.00 lbs
• Height: 22.70"
• Length: 20.50"
• Width: 14.50"
• Hose length: 9.85'
• Hose diameter: 1.37"
• Power tool activation - allows power tool's switch to turn vacuum on & off
• The automatic filter cleaning system cleans the filter every 15 seconds
• Wet vacuuming water level sensor - automatically shuts down vac when water reaches a max height
• Power Broker dial - for allocating power between vacuum & connected power tool. also allows suction control
• When paired w/ a HEPA filter (VF120H), this unit meets the EPA definition of a HEPA vacuum.
• Includes:
  -9.85 ft. vacuum hose
  -Bend nozzle
  -Power tool adapter nozzle
  -Cellulose flat filter - VF100
  -Plastic bag VB00P (1bag)
  -HEPA filter & 5pk. fleece filter bag also included!
  

Bosch
14 gallon vacuum kit
w/ HEPA filter & Fleece bag kit

• 14.50 gallon capacity
• Capable of wet & dry pick up
• Built-in drain
• 9.50 amp motor/ 120 vac
• Air flow: 150 CFM
• Air volume: 150 CFM
• Automatic shut-off
• Weight: 38.00 lbs
• Height: 34.10"
• Length: 22.25"
• Width: 14.75"
• Hose length: 9.85'
• Hose diameter: 1.37"
• Power tool activation - allows power tool's switch to turn vacuum on & off
• The automatic filter cleaning system cleans the filter every 15 seconds
• Wet vacuuming water level sensor - automatically shuts down vac when water reaches a max height
• Power Broker dial - for allocating power between vacuum & connected power tool. also allows suction control
• When paired w/ a HEPA filter (VF120H), this unit meets the EPA definition of a HEPA vacuum.
• Includes:
  -9.85 ft. vacuum hose
  -Bend nozzle
  -Power tool adapter nozzle
  -Cellulose flat filter - VF100
  -Plastic bag VB00P (1bag)
  -HEPA filter & 5pk. fleece filter bag also included!!

Bosch
1" SDS-Plus
Rotary hammer

• SDS-Plus BIT SYSTEM
• 1" diameter drilling capacity with spiral drill bit
• 2-5/8"diameter drilling with THIN-WALL CORE BIT
• Optimal Concrete Capacity Range: 3/16" - 5/8"
• Impact Energy (ft. lbs.): 2.2
• 7.2 amp motor
• 3 modes of operation: rotary hammer, drill-only & chipping/hammer mode
• Integral clutch
• Tool Weight: 6.40 lbs.
• Tool length: 14-3/4"
• Side handle, depth gauge, & carrying case included

Bosch
1" SDS-Plus
Rotary hammer

• SDS-Plus BIT SYSTEM
• 1" diameter drilling capacity with spiral drill bit
• 2-5/8"diameter drilling with THIN-WALL CORE BIT
• Optimal Concrete Capacity Range: 3/16" - 5/8"
• Impact Energy (ft. lbs.): 2.2
• 7.5 amp motor
• D-Handle design
• HammerHook™ allows quick tool storage during the job.
• 3 modes of operation: rotary hammer, drill-only & chipping/hammer mode
• Integral clutch
• Tool Weight: 6.70 lbs.
• Tool length: 17-1/4"
• Side handle, depth gauge, & carrying case included

Bosch
1-1/8" SDS-Plus
Rotary hammer

• SDS-Plus BIT SYSTEM
• 1-1/8" diameter drilling capacity with spiral drill bit
• 3/1/8" diameter drilling with THIN-WALL CORE BIT
• Optimal Concrete Capacity Range: 1/4" - 7/8"
• Impact Energy (ft. lbs.): 2.6
• 8.0 amp motor
• 3 modes of operation: rotary hammer, drill-only & chipping/hammer mode
• Integral clutch
• Tool Weight: 7.70 lbs.
• Tool length: 13-1/4"
• Side handle, depth gauge, & carrying case included

Bosch
1-1/4" SDS-Plus
Rotary hammer

• SDS-Plus BIT SYSTEM
• 1-1/4" diameter drilling capacity with spiral drill bit
• 3"diameter drilling with THIN-WALL CORE BIT
• Optimal Concrete Capacity Range: 1/4" - 7/8"
• Impact Energy (ft. lbs.): 3.7
• 8.5 amp motor
• Variable speed 3-finger trigger
• Active Vibration Control in the hammer mechanism & the grip area provides maximum user comfort
• Constant Response Circuitry — Provides soft-start, maintains constant speed under load, provides overload protection
• D-Handle design
• 3 modes of operation: rotary hammer, drill-only & chipping/hammer mode
• Integral clutch
• Tool Weight: 10.30 lbs.
• Tool length: 15-1/2"
• Side handle, depth gauge, & carrying case included

Milwaukee
ElectroMagnetic drill press base - Fixed poistion

• 120 Volt AC only, 12.50 amp max. rating. Grounded.
• 9" drill travel
• Fixed position base
• Variable speed control on panel
• Length: 11.00"
• Height: 15"
• Width: 4-1/4"
• Tool weight: 41.00 lbs.
• Feedback speed control maintains speed & a motor/magnet lockout prevents de-mag during operation.
• For use on any flat ferrous material, 1/2" and thicker
• BASE ONLY (no drill motor included)

Milwaukee
ElectroMagnetic drill press base - Ajustable poistion

• 120 Volt AC only, 12.50 amp max. rating. Grounded.
• 11" drill travel
• Ajustable position base
• Variable speed control on panel
• Length: 11.00"
• Height: 17-1/4"
• Width: 4-1/4"
• Tool weight: 49.00 lbs.
• Feedback speed control maintains speed & a motor/magnet lockout prevents de-mag during operation.
• Adjustable position on this base makes lining up the bit easier and faster. The 4203 offers adjustablity of 3/4" in direction of base length [front -to-back] and 20° right or left of center.
• For use on any flat ferrous material, 1/2" and thicker
• BASE ONLY (no drill motor included)

Milwaukee
1/2" Drill motor for ElectroMagnetic drill press

• 1/2" CAP. keyed drill chuck
• 120 VAC
• 600 RPM
• 6.20 amp motor
• Weight: 8.00 lbs.
• Tap capacity: 5/8"-18
• Maximum force: Develops up to 1650 pounds of drill point pressure with a 1" steel plate
• Taps up to 5/8-inch, 18-threaded holes.
  (5/8-11 and ½-13 taps are not recommended)
• Use with 4203 & 4203 mag stand bases (sold separately)

Milwaukee
3/4" Drill motor for ElectroMagnetic drill press

• 3/4" CAP. keyed drill chuck
• 120 VAC
• 350 RPM
• 11.50 amp motor
• Weight: 21.00 lbs.
• Tap capacity: 1"-14
• Maximum force: Develops up to 1670 pounds of drill point pressure with a 1-inch steel plate
• 3/4” Capacity: Taps up to 1-inch, 14-threaded holes
• Dual-mount gear case/reverse mount: permits tight quarter drilling
• Use with 4203 & 4203 mag stand bases (sold separately)
  

Milwaukee
No. 3 Morse taper drill motor for ElectroMagnetic drill press

• No. 3MT Taper for chuck
• 120 VAC
• The 2-speed unit runs at 375 RPM & 750 RPM
• 11.50 amp motor
• Weight: 23.00 lbs.
• Tap capacity: 1"-14
• Maximum force: Develops up to 1600 pounds of drill point pressure with a 1-inch steel plate
• Taps up to 1-inch, 14-threaded holes
  
• Dual-mount gear case/reverse mount: permits tight quarter drilling
• Use with 4203 & 4203 mag stand bases (sold separately)

Milwaukee
No. 3 Morse taper drill motor for ElectroMagnetic drill press

• No. 3MT Taper for chuck
• 120 VAC
• The 2-speed unit runs at 250 RPMs & 500 RPM
• 11.50 amp motor
• Weight: 23.00 lbs.
• Tap capacity: 1"-14
• Maximum force: Develops up to 1600 pounds of drill point pressure with a 1-inch steel plate
• Taps up to 1-inch, 14-threaded holes
  
• Dual-mount gear case/reverse mount: permits tight quarter drilling
• Use with 4203 & 4203 mag stand bases (sold separately)

Milwaukee
1/2" Electric Drill

• 1/2" CAP. keyed drill chuck
• 120 VAC, 7.00 amp motor
• 650 RPM with reversing
• Tool length: 12.25"
• Weight: 11.20 lbs.
• Cap. in steel: Twist-type drill bit: 1/2”
• Flat Boring Bit: 1-1/2"
• Hole Saw: 3-1/2"
• Auger bit: 1-1/2"
• Self-Feed bit: 2-9/16"
• Top handle & grip included

Milwaukee
1/2" Electric Drill

• 1/2" CAP. keyed drill chuck
• 120 VAC, 7.00 amp motor
• 0-900 RPM with reversing
• Tool length: 12.25"
• Weight: 11.20 lbs.
• Cap. in steel: Twist-type drill bit: 1/2”
• Flat Boring Bit: 1-1/2"
• Hole Saw: 3-1/2"
• Auger bit: 1-1/2"
• Self-Feed bit: 2-1/4"
• Top handle & grip included

Milwaukee
1/2" Electric Drill

• 1/2" CAP. keyed drill chuck
• 120 VAC, 7.00 amp motor
• 450 RPM with reversing
• Triple gear gearbox
• Tool length: 12.25"
• Weight: 11.40 lbs.
• Cap. in steel: Twist-type drill bit: 1/2”
• Flat Boring Bit: 1-1/2"
• Hole Saw: 3-1/2"
• Auger bit: 1-1/2"
• Self-Feed bit: 3"
• Top handle & grip included

Milwaukee
3/4" Electric Drill

• 3/4" CAP. keyed drill chuck
• 120 VAC, 10.00 amp motor
• 350 RPM with reversing
• Triple gear gearbox
• Tool length: 18.50"
• Weight: 19.00 lbs.
• Spindle type: #3 Jacobs taper
• Cap. in steel: Twist-type drill bit: 3/4”
• Flat Boring Bit: 1-1/2"
• Hole Saw: 6"
• Auger bit: 1-1/2"
• Self-Feed bit: 4-5/8"